
Twenty-six products designed around one purpose: making the avid outdoorsman's gear easier to haul, organize, store, and use. From the trailer that carries it all to the waterfowl blind where it matters most, every product is designed to turn wasted space into functional storage. Built for the gear you depend on. Manufactured for the way you live.
01 / Trailer
Decoy bar walls, wader hangers, flag dens,
bucket retainers and hooks. Move gear off the
trailer floor and onto the wall so the whole rig
loads faster.
02 / Waterfowl
Magnetic gun rests, shelves, phone mounts
and trays for A-frames, panel blinds and pits. BOSS stands for Blind Organization Shelf System.
the Decoy Bar Wall

Stop bagging and stacking. The BOSS Decoy Bar Mounts turn a bare trailer wall into vertical storage, so full-bodies and floaters hang in reach and load top to bottom. Two 36 in. sections mount to the wall and free up the whole floor for the rest of the rig.
Full 5052 marine-grade aluminum build that will not ever corrode, so it lives in a wet trailer season after season without rusting or bending.
Bars set on 7 in. centers hold full-body and floater decoys by the keel or the head, spaced so they don’t tangle when you pull one.
Ships as two 36 in. sections built around 3/4 in. EMT conduit. Run them in a line or split them across two walls to fit your trailer.
Two-way retaining holds decoys in place on the drive out, so nothing shakes loose between the shop and the water.
We match the material to the job instead of using one for everything. A shelf that sits in your lap is marine HDPE, a decoy wall loaded with full-bodies is 5052 aluminum, and a flag den bolted to a trailer door is carbon steel under a black powder coat. It costs more to build this way, and it's the reason our gear lasts.

1/4 in. marine HDPE
The three Blind Shelves are strong 1/4 in. marine HDPE with stainless and aluminum hardware. The A-frame clamp is anodized aluminum.
Marine-grade aluminum
The BOSS Decoy Bar Mounts are 5052 marine-grade aluminum construction that will not ever corrode. Multi-Use Hooks run 3/16 in. marine-grade aluminum, powder coated.
Neodymium magnets
60 lb holding strength on the gun rests, enough that a dog bumping the wall does not move it. The pit blind shelf runs two 75 lb magnets.

"Well made products"
I have been hunting for 40+ years and the products made by OFC are things I have never seen before but I knew I needed as soon as I saw them. Well made thoughtful hunting products. Well done OFC !!
Mark S.
Mark S.


"Great product, Quick Delivery"
Great product, quick delivery even during the holiday season! Very pleased with OFC
Erik G.


"Top Notch!"
Top notch!! OFCs products are well made well thought out and made in America. My blind is now much more efficient and safer for us now that we have mini rack frames installed! Fellow hunters ! If your using upright blinds do yourself and your partners a favour! Buy these!! Well done OFC!!! Regards
Scott M.

Our mission, unchanged: design and provide innovative, high-quality products for the outdoor industry that improve safety, maximize space, and enhance the overall experience.
Most of it comes down to safety and space. A gun rest that actually holds means a shotgun isn't leaning against the blind wall at 5 a.m., and a trailer wall is wasted room until you can hang something on it.
After the box opens
Install
Instruction PDFs and video for the BOSS
Rack, the A-frame mount and the magnetic
double gun rest.
Warranty
Terms drafted and awaiting owner sign-off.
The live site currently returns a 404 on this
page.
Contact
Odd blind, odd trailer, odd boat? Send
measurements and photos before you drill.
A few of our best sellers sell out fast, and we run limited batches. Leave your email and we'll send one note when a product is back in stock. That's the only reason we'll reach out.

Engineering the industry's best hunting and outdoor accessories. Veteran owned and operated.

Copyright 2026. Rugged Pursuit Gear. All Rights Reserved.
Designed & Powered by Story Co Agency